Cambridge Audio 651, 751BD Video Setup, Setup menu, Picture Adjustment, Primary Output, 3D Mode

Setup menu continued

Video Setup

Setup Menu

Playback Setup	Picture Adjustment
Video Setup	Primary Output		HDMI 1
	3D	Mode	Auto
Audio Format Setup
Audio Processing	3D	TV Size	46
Device Setup	TV Aspect Ratio		16:9 Wide
Network Setup	TV System		NTSC
Exit	Output Resolution		Auto

Adjust picture control parameters

Exit

The "Video Setup " section of the Setup Menu system allows you to
configure various video output options. The menu items in this section
are:	Settings
Menus
Picture Adjustment	......................................HDMI 1
Primary Output	HDMI 2 & Analog
	HDMI 1
	HDMI 2
3D Mode	Analog
	Auto
	Forced
3D TV Size	Off
	46
TV Aspect Ratio	4:3 Letterbox
	4:3 Pan & Scan
	16:9 Wide
TV System	16:9 Wide/Auto
	PAL (default)
	NTSC
Output Resolution	Multi-system
	Auto
	1080p
	1080i
	720p
	480p/576p
	480i/576i
1080p24 Output	Source Direct
	Auto (default)
	On
HDMI Option	Off
	Colour Space (1&2)
	Auto
	RGB Video Level
	RGB PC Level
	YCbCr 4:4:4
	YCbCr 4:2:2
	Deep Colour (1&2)
	36 Bits
	30 Bits (Dithered)
	30 Bits
	Off (Dithered)
	Off (default)
	Demo Mode
	On
	Off (default)
	Video Only
	Yes
	No (default)

Display Options ............................................Subtitle Shift

-5 to +5 OSD Postion

0-5 OSD Mode

Normal

Silent

Remaining

Angle Mark

On

Off

PIP Mark

On

Off

SAP Mark

On

Off

Screen Saver

On

Off

Energy Saver

1. Picture Adjustment

This is used to adjust picture control parameters. The 651/751BD provides a wide array of picture controls. Please refer to the "Picture Adjustment" section of this manual for details of each control.

2. Primary Output

To select the primary video output method. The options are:

HDMI 1 – Use HDMI 1 as the primary video output port. This setting will ensure that the HDMI 1 output gets the best possible picture quality. The dedicated Marvell QDEO video processor will be used unless “Source Direct” for output resolution is selected, in which case the QDEO DE2750 video processor is bypassed. Component and composite video output may not be available or may be limited to a lower resolution based on content source limitations.

HDMI 2 – Use HDMI 2 as the primary video output port. Similar to “HDMI 1”, this setting ensures that the HDMI 2 output gets the best possible picture quality, except that it utilizes the video decoder in the Mediatek Chipset to perform necessary video processing, not the QDEO video processor.

Analog – Use component video as the primary video output port. This setting will ensure that the component output is always available and displays proper video signals. The video decoder in the player performs any necessary format conversion, and the QDEO video processor is completely bypassed.

Note: Copyright control mechanisms encoded on the disc may limit the output resolution of the component video output. For DVD, if CSS encryption is in use the output resolution is limited to no more than 480p/576p; for Blu-ray Discs, the output resolution is limited to no more than 1080i, and could be lower if the disc contains an Image Constraint Token.

3. 3D Mode

To choose the video output mode for available 3D content at the HDMI output ports. The options are:

Auto – Output 3D if supported both by the disc content and the display. The player automatically checks for the existence of 3D content on the disc and the 3D compatibility of the TV or projector. If both are qualified, the player sends 3D video from its HDMI output terminals, otherwise only 2D video is sent out. Active shutter 3D-compatible glasses are required compatible with your TV.

Forced – Always output 3D video format for 3D Blu-ray discs. You might experience a black screen (no video output) if your TV is not 3D compatible.

Off – Always output 2D video format, even when 3D video exists on the disc. This can guarantee the video quality in case that your TV is not 3D compatible, or some necessary part (such as the 3D glasses) is missing.

24