Dimensions - This sets speaker sizes for Pro Logic II- it is independent of your other speaker settings.
Centre Width - allows you to artificially increase the width of your front speakers by means of delay.
Dolby Digital setup/Dynamic: This allows the adjustment of the Dynamic compression applied to the audio. This can be useful when listening to action films (large dynamic range between talking and explosions) late at night. When set to maximum this will force the quiet and loud parts of the signal to a similar level.
Channel Trim: Allows adjustment of the decoder levels for each individual channel in turn to optimise audio setup.
Please note that all adjustments made to level and delay in the Audio Setup Page ONLY affect the speaker and decoder outputs. The digital outputs are unaffected by these adjustments.
Video Setup Page
The various settings on this screen are all concerned with fine tuning your DVD picture. You can adjust settings here whilst leaving the television settings as they are.
Preference Page (only accessible when resume is cancelled and a disc is in the player).
TV Type - The DVD player can be set for either a European PAL television or an NTSC unit. Alternatively AUTO will allow the DVD to adjust automatically.
PBC - This setting allows chapter skip during VCD playback.
Audio Setting - Setting a particular language here will mean the DVD will automatically look for that dialogue on any DVD inserted into the machine.
Subtitle - Setting a particular language here means that the DVD will look for this particular language. Setting it to the same as the Audio setting will cancel the subtitles out. Press the button on the remote to restore same language subtitles.
Disc Menu - This allows the language to be changed on the Scene selection/Special features menu where permissible by the disc.
Parental - Adjusting this blocks films above a set classification level (ie PG13) from playing on the player if children are using it if you wish.
Password - For editing the above settings. The password default is 7890 and can be changed by correctly entering the default followed by your new password.
Default - This will restore all of the original factory settings if required.
