Remote
Control
CAI
Network
EtherCAI Module
EtherNet
Network
LAN | Standard | |
WLAN | ||
TCP/IP Router | ||
Internet | ||
|
CAMCO Vortex series amplifiers are supplied with a remote control facility as standard (Camco Amplifier Interface - CAI). The Tecton series can be upgraded for remote control via the use of the
Cost Efficient Network
The CAI interface is a cost efficient solution, which via a RJ11 connector handles all the amplifiers settings and status readings. Up to 32 amplifiers can be daisy chained together into a CAI network (blue lines on the illustration above).
amplifiers connected to the EtherCAI network. All registered users of CAMCO amplifiers can receive CAMCO’s remote control software free of charge. Please contact your CAMCO dealer for further information.
Control of All Parameters
The CISUS software provides access to all the amplifiers front plate read outs, amongst others: Signal. Clip and Protect. Additionally the amplifiers mute function is also accessible. Furthermore CISUS offers peak meter readouts of the output stages voltage and current as well as dynamic readout of the amplifiers temperature.
Ethernet & TCP/IP Compatible
The EtherCAI module is a
Remote Control of Infinite Amplifiers
Several EtherCAI modules can be connected to the same standard Ethernet router. Thus there is no upper limit to the number of amplifiers which can be remote controlled by a PC over an EtherCAI network.
User-friendly Software
The remote control software provides a
The CISUS remote con- trol software offers different views of ampli- fiers in a group, for easy overview and control. Illustrated here vertical, horizontal and rack- view of the same ampli- fier group.
Amplifier groups and views are easy to define by drag’n’drop func- tionality in the network tree (upper left corner).
