Campbell Hausfeld AVW100

AVW100 Vibrating Wire Interface

Page 2 of 2

The choice of which instruction to use and the exact parameters required are

specific to the sensor you have. Some details are given in the Campbell Scientific

AVW1/4 manual for some of the Geokon sensors as an example. Most

manufacturers of vibrating wire sensors publish data on how to use their sensors

with Campbell Scientific dataloggers. They usually give full details of the required

parameters needed to get the best readings from each model of their sensor –

please contact your sensor supplier for advice.

Some manufacturers also make this information available on the Internet, e.g. a

useful document is published by Slope Indicator here:

http://www.slopeindicator.com/pdf/manuals/cr10-and-vw-sensors.pdf

Issued 21.6.04

Campbell Scientific Ltd,

Campbell Park, 80 Hathern Road,

Shepshed, Loughborough, LE12 9GX, UK

Tel: +44 (0) 1509 601141

Fax: +44 (0) 1509 601091

Email: support@campbellsci.co.uk