Operating Instructions

Important Safety Instructions

b. Be thoroughly familiar with the

Personal Safety

INSTRUCTIONS PERTAINING TO A

 

 

controls and the proper use of the

a.

Stay alert. Watch what you are

 

 

equipment. Follow all instructions.

 

 

 

doing and use common sense

RISK OF FIRE, ELECTRIC SHOCK, OR

 

 

 

 

 

Contact your Campbell Hausfeld

 

INJURY TO PERSONS

 

 

 

when operating the tool. Do not

 

 

representative if you have any

 

This manual contains safety, operational

 

 

 

use the tool while tired or under

 

 

questions.

 

 

 

 

 

 

 

 

the influence of drugs, alcohol,

and maintenance information. Contact

 

 

 

 

 

 

 

 

 

 

 

 

c.

Only persons well acquainted with

 

or medication. A moment of

your Campbell Hausfeld representative

 

 

 

these rules of safe operation should

 

inattention while operating the

if you have any questions.

 

 

 

 

 

be allowed to use the unit.

 

 

 

tool increases the risk of injury to

 

 

 

When using tools,

 

 

 

 

 

 

 

 

 

 

 

Read and

 

 

 

persons.

 

 

 

 

 

 

 

 

 

 

 

 

basic precautions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

understand tool

 

 

should always be followed, including

 

 

 

b.

Dress properly. Do not wear loose

labels and manual. Failure to follow

the following:

 

clothing or jewelry. Contain long

warnings, dangers, and cautions could

 

 

 

 

 

 

 

 

 

 

 

 

 

hair. Keep hair, clothing, and

California proposition 65

result in DEATH or SERIOUS INJURY.

 

 

gloves away from moving parts.

 

 

 

This product or

Work Area

 

 

 

 

 

 

 

 

 

Loose clothes, jewelry, or long

 

 

 

its power cord may

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

contain chemicals known to the State

a.

Keep the work area clean and well

 

hair increases the risk of injury to

of California to cause cancer and birth

 

 

lighted. Cluttered benches and dark

 

persons as a result of being caught

defects or other reproductive harm.

 

 

areas increase the risks of electric

 

in moving parts.

Wash hands after handling.

 

 

 

 

 

shock, fire, and injury to persons.

c.

Avoid unintentional starting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

b.

Do not operate the tool

 

 

 

Be sure the switch is off before

 

 

 

 

 

 

 

in explosive atmospheres,

 

 

 

connecting to the air supply. Do not

You can create dust when

 

 

 

 

 

 

 

 

 

such as in the presence of

 

 

 

carry the tool with your finger on

you cut, sand, drill or grind

 

 

 

 

 

 

materials such as wood,

 

 

 

flammable liquids, gases,

 

 

 

the switch or connect the tool to the

 

 

 

 

 

 

 

 

 

 

 

 

paint, metal, concrete, cement, or other

 

 

or dust. The tool is able to create

 

air supply with the switch on.

masonry. This dust often contains

 

 

sparks resulting in the ignition of

d.

Do not overreach. Keep proper

chemicals known to cause cancer, birth

 

 

 

 

the dust or fumes.

 

 

 

 

 

 

 

footing and balance at all times.

defects, or other reproductive harm.

 

 

 

 

 

 

 

 

 

 

 

 

Wear protective gear.

c.

Keep bystanders, children, and

 

Proper footing and balance enables

General

 

 

visitors away while operating the

 

better control of the tool in

 

 

tool. Distractions are able to result in

 

unexpected situations.

 

 

 

 

 

 

 

 

a. To reduce the risks of

 

 

 

the loss of control of the tool.

e. Use safety equipment. A dust mask,

 

electric shock, fire, and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

non-skid safety shoes and a hard

 

injury to persons, read all

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

hat must be used for the applicable

 

the instructions before

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

conditions.

 

using the tool.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tool Components and Specifications

Cap Exhaust

 

 

Requires: 0.3 SCFM with

 

10 fasteners per minute @ 90 psi

 

Trigger

 

 

 

 

 

Air inlet: 1/4 inch NPT

 

 

 

FASTENER SIZE RANGE:

 

 

 

 

3/8 inch to 1-1/4 inch

 

 

 

MAGAZINE CAPACITY:

 

 

 

 

100 fasteners per load, 18 gauge

 

 

Latch Button

STAPLES: 1/4 inch crown

 

 

 

 

 

WEIGHT: 2 lbs., 15 oz.

 

 

 

LENGTH: 10-1/2 inch

 

 

 

HEIGHT: 9-1/2 inch

 

 

 

MAXIMUM PRESSURE: 100 psi

Quick

 

 

PRESSURE RANGE: 60 psi to 100 psi

Clear

 

 

Nose

 

 

 

 

 

 

 

Work Contact Element (WCE)

Fastener

Magazine

 

 

 

Discharge Area

 

 

 

 

www.chpower.com

2