Operating Instructions

Models GN356402AC, GN356502AC, and GN356602AC

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Generators

TM

BUILT TO LAST

Description

These generators are powered by air- cooled four cycle engines and designed to run at maximum RPM and give a continuous wattage as rated.

Unpacking

When unpacking, inspect carefully for any damage that may have occurred during transit. Make sure any loose fittings, bolts, etc., are tightened before putting unit into service.

General Safety

1.Before starting or servicing any generator, read and

understand all

MANUAL

 

 

 

instructions. Failure

 

 

 

 

to follow safety

 

 

 

 

 

 

precautions or instructions can cause equipment damage and/or serious personal injury. Engine instructions for these units are contained in a

Fig. 1 - Assembled Units GN356402AC and GN356502AC

separate manual. Retain all manuals for future reference.

2.Never use this generator for any application other than that specified by the manufacturer. Never operate this generator under conditions not approved by the manufacturer. Never attempt to modify this generator to perform in any manner not intended by the manufacturer.

3.For maintenance and repairs, use only products and parts recommended by the manufacturer.

4.Be sure that the generator is properly grounded to an external ground path prior to operation. Refer to the section entitled

“Grounding Instructions” for proper grounding procedures.

5.Be sure that the generator is operated only by persons who have read and understand these instructions.

6.Be sure that the generator is placed on a flat level surface prior to and during operation. The generator must not slide or shift during operation.

7.Keep all persons away from the generator during operation.

8.Do not allow persons wearing loose clothing or jewelry to start or operate the generator. Loose clothing or jewelry may become

entangled in moving components, causing equipment damage and or personal injury.

9.Keep all persons away from parts that move or become hot during operation.

10.Be sure all powered devices are shut off prior to connecting them to the generator.

11.Keep the generator clean and well maintained at all times.

!WARNING

Never operate this generator in an explosive atmosphere or poorly ventilated area.

© 2001 Campbell Hausfeld / Scott Fetzer

For parts, product & service information

IN951300AV 2/01

visit www.chpower.com

or call 1-800-803-1436

Page 1
Image 1
Campbell Hausfeld GN356502AC, GN356602AC operating instructions Generators, Description, Unpacking, General Safety