Pressure Washer

Safety and Warning Information (Continued)

•Release the trigger when changing from high to low pressure modes. Failure to do so could result in damage to the nozzle.

Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose.

Pre-Operation

UNPACKING

Remove the equipment and all parts from the carton. The carton should contain the following.

•One pressure washer (pump, engine, cart base)

•One cart handle assembly

•One spray gun

•One lance

•One tip holder with 2 spray tips. Additional tips available for purchase, see Page 13

•One high pressure hose

•One pack of nuts, bolts, and manuals

If any parts are missing, DO NOT RETURN THE UNIT TO THE RETAILER. Know the unit’s model number (located on the serial number tag on the pressure washer frame) and call 1- 888-Maxus4U for replacement parts.

After unpacking the product, inspect it carefully for any damage that may have occurred during transit. Make sure to tighten fittings and bolts before using the pressure washer.

Do not operate the unit if it’s damaged during shipping,

handling, or use. Damage could result in bursting and cause injury or property damage.

ASSEMBLY

Use two adjustable or 7/16 inch wrenches to assemble the pressure washer.

1.Slide the handle assembly over the lower legs of the cart base. Use the supplied nuts and bolts to secure the handle to the legs. See Figure 1.

Figure 1 – Assemble Handle

2.Brass Swivel Adaptor (See Figure 2). If it’s not already attached to the pump inlet, assemble the brass swivel adapter and attach it to the pump inlet (See Figure 3 and Figure 4). Be sure to connect the correct side of the brass swivel adapter to the pump.

Connect this end to garden hose Washer

Washer

 

with filter

Connect this end to pump

screen

Figure 3 - Brass swivel adapter

Brass swivel

Thermal

Chemical injector

hose barb

relief valve

adapter

 

 

 

Brass swivel adapter

Garden hose

High

Pump pressure

outlet hose

Pump inlet

Pump inlet

Figure 4 - Connect the brass swivel to the pump

Figure 2 - Pump hook up

www.maxustools.com

5