Campbell Hausfeld IN727700AV 9

Operating Instructions and Parts Manual	CHN70800

Getting To Know Your Framing Nailer Like A Pro

Bubble		Electronics	Work
Level	Conversion Switch	ON / OFF	Contact
		Switch	Element
			(WCE)	Tethered
				Tethered
				No-mar
Adjustable				Decking Tip
Exhaust
Exhaust
Deflecter
				Quick Clear
				Nose Lever
			Battery Cover/
Trigger			Compartment
Trigger

Low Nail

Indicator

Rubber ComfortLight

Grip

Pull-out Warning

Decal

Swivel Plug

Magazine

Low Nail	Adjustable Depth
Indicator	Control Knob
Light

Laser

No-mar Tip

Storage

Pusher Latch Button

Nail Pusher

Nail Loading

Area

Figure 6 - Components of the Framing Nailer

Features

Anti-Dry Fire

This tool is equipped with an Anti-Dry Fire feature. This prevents the Work Contact Element (WCE) from being pushed in when only a few nails remain. Simply load new nail clip behind remaining nails to continue shooting.

Tethered No-mar Decking Tip

The tool is fitted with a no-mar tip which is tethered to the tool to prevent loss when not mounted to tool. To utilize the no-mar tip, simply slide it over the tools WCE.

Low Nail Indicator Lights

The tool is equipped with lights on either side of the tool near the nose. When the nail count becomes low, the lights will turn yellow. When the nail count is nearly out, the Anti-Dry Fire feature will engage and the lights will turn red. (See Loading the Nailer section).

Nail Placement Laser Pointer

The tool is equipped with a laser mounted near the nose. This can be seen through the wide slots in the WCE and / or no- mar tip. The laser will indicate exact placement of the fastener.

This is a Class IIIA Laser Product that

emits laser radiation. Do not stare into beam or view directly with optical instruments.

Bubble Level

The tool is equipped with a bubble level located on the head cap. This will assist in aligning the tool for level driving of the fastener. The bubble level will assist in vertical and horizontal positioning of the tool.