See Warranty on page 4 for important information about commercial use of this product.
Operating Instructions & Parts Manual | Model PA212102 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
General Purpose Filter
BUILT TO LAST
Description
The Campbell Hausfeld general purpose filter is designed to remove most liquid and solid particles from the air supply.
Specifications
Average Air Flow . . . . .42.2 SCFM (Based on 100 psi
inlet pressure with 5 psi drop)
Filter type . . . . . . . . . . . .5 Micron
Body material . . . . . . . .Aluminum
Bowl material . . . . . . . .Polycarbonate
Bowl size . . . . . . . . . . . .100 ml
Max. Temperature . . . .125˚ F (52˚ C)
Max. Pressure . . . . . . . .150 psi
Air Inlet/outlet . . . . . . . .3/8” NPT
Weight . . . . . . . . . . . . . .1.10 lbs
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
Safety Guidelines
This manual contains information that is very important to know and under- stand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
DANGER Danger indicates
!an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, could result in death or serious injury.
! CAUTION | Caution indicates a | |
potentially | ||
| ||
hazardous situation which, if not | ||
avoided, may result in minor or | ||
moderate injury. |
| |
| Notice indicates | |
NOTICE | ||
important | ||
| ||
information, that if not followed, may cause damage to equipment.
General Safety
Information
This product is a part of a high pressure system and the following safety precautions must be followed at all times along with any other existing safety rules.
Read this instruction manual
before installing this device MANUAL to the air supply system. Be
thoroughly familiar with
the controls and the proper use of the equipment.
!WARNING Safetyglasses 
must be worn during
operation.
1.Always work in a well ventilated area.
2.Do not exceed any pressure rating of any component in the system.
3.Protect air lines from damage and/or punctures.
4.Check air hoses for weak or worn condition before each use. Make sure all connections are secure.
5.Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition.
is specifically designed for compressed air service
ONLY. Use with any other material (liquid or gas) is a misapplication and not permitted. Use or injection of certain hazardous liquids or gases in the system (such as oxygen, alcohol or liquid petroleum gas) will harm the unit and result in a combustible condition or hazardous external leakage. Misapplication will void all warranties and manufacturer’s responsibilities.
Installation
! WARNING
Disconnect power and 
release all pressure from the 
system before attempting to 
install, service, relocate or perform any maintenance.
1.Locate the air flow direction arrow (See Figure 2, detail). This arrow shows the direction of the air flow, i.e., it points to the outlet.
2.Securely mount the filter in a vertical position as close as possible to air tool connection.
3.Verify the arrow points to the outlet. (See Figure 2.)
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2002 Campbell Hausfeld/Scott Fetzer | For parts, product & service information | IN282500AV 11/02 |
visit www.chpower.com
