See Warranty on page 4 for important information about commercial use of this product.
Operating Instructions & Parts Manual | Model PA212302 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Pressure Regulator
BUILT TO LAST
Description
The
Specifications
Average Air Flow . . . .45.2 SCFM (Based on 100 psi
inlet pressure with 5 psi drop)
Regulator | Self |
style . . . . . . . . . . . . . . | .relieving |
Body material . . . . . . .Aluminum
Max. Temperature . . .175˚ F
Max. Pressure . . . . . . .300 psi
Air Inlet/outlet . . . . . .3/8” NPT
Weight . . . . . . . . . . . . .1.5 lbs
Unpacking
Warning indicates a potentially
hazardous situation which, if not avoided, could result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE | Notice indicates | |
important | ||
|
information, that if not followed, may cause damage to equipment.
General Safety
Information
This product is a part of a high pressure system and the following safety precautions must be followed at all times along with any other existing safety rules.
Read this instruction manual before installing this device
Figure 1
5.Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition.
! DANGER
This product is specifically designed for compressed air service ONLY. Use with any other material (liquid or gas) is a misapplication and not permitted. Use or injection of certain hazardous
After unpacking the unit, inspect carefully for any damage that may have
to the air supply system. Be thoroughly familiar with
MANUAL
liquids or gases in the system (such as oxygen, alcohol or liquid petroleum
occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service.
Safety Guidelines
This manual contains information that is very important to know and under- stand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
DANGER Danger indicates
!an imminently hazardous situation which, if not avoided, will result in death or serious injury.
the controls and the proper use of the equipment.
!WARNING Safetyglassesmust be worn during operation.
1.Always work in a well ventilated area.
2.Do not exceed any pressure rating of any component in the system.
3.Protect air lines from damage and/or punctures.
4.Check air hoses for weak or worn condition before each use. Make sure all connections are secure.
gas) will harm the unit and result in a combustible condition or hazardous external leakage. Misapplication will void all warranties and manufacturer’s responsibilities.
The relief flow capacity of
regulators is limited. Install additional pressure relief devices to alleviate over pressurized conditions. Written approval must be obtained from manufacturer if this device is to be used for life support systems or other
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2002 Campbell Hausfeld/Scott Fetzer | For parts, product & service information | IN282400AV 11/02 |
visit www.chpower.com