Campbell Hausfeld PS120B 22

Operating Instructions and Assembly Instructions

Airless Paint Sprayers

“Force Feeding” Pump

To remove trash that has been caught in the valves, the unit can be force fed. With pump on and prime/spray knob turned to “prime” position, pour the appropriate solvent into the suction tube and then fold hose as shown opposite. While firmly squeezing the suction tube, slide hand down toward the pump and repeat until pump primes.

Notes:

•Weather conditions can cause unsatisfactory results when spraying some coatings.

•High humidity prolongs set, and cure times.

•High temperatures decrease set, and cure times.

•Cold temperatures extend set, and cure times.

•Variations in temperature, and humidity can cause variations in finish quality.

•Coating manufacturers can recommend additives to resolve some of these problems, and should be contacted for assistance with particular problem resolutions.