Assembly Instructions and Parts List | PW1686 |
System Connection
1.Insert lance into the gun and turn clockwise to positive stop as shown in Figure 8.
Figure 8 - Gun/Lance Connection |
2.Ensure that the power switch is in the “OFF” position.
3.Attach the high pressure hose and gun assembly to the unit.
4.Connect garden hose as explained under Garden Hose Connection Instructions.
5.Plug the power cord into a grounded 120V outlet, that is on a dedicated circuit.
6.Turn water on.
7.Depress and hold the trigger on the gun for one minute to release pres- sure and remove any air trapped in the system.
8.Turn the “ON/OFF” switch to the “ON” position.
NOTE: REFER TO PRODUCT MANUAL FOR OPERATING INSTRUCTIONS
High
Pressure
Hose
Gun
On/Off
Switch
OUTLET | 13 mm |
INLET
Garden
Hose
Figure 9
www.chpower.com
4
