Max Pressure with Effective Pressure Maximum Motor Power Maximum Inlet Unit
Model Standard Lance w/Turbo Lance Capacity (Single Phase) Voltage Water Temperature Weight
Electric PressureWasher
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
IN455600AV 1/99
© 1999 Campbell Hausfeld
Specifications
PW1876 1300 psi 1850 psi 1.9 GPM 14.5 Amps 120V 100˚F 39 lbs.
Assembly Instructions
Assembly Instructions and Parts List PW1876
Figure 1 Figure 2 Figure 3 Figure 4
Garden Hose and System Connection
GARDEN HOSE CONNECTION
INSTRUCTIONS
1. Attach nipple adapter to inlet fit-
ting on the unit (this may already
be attached to the pump).
2. Attach quick connect fitting to gar-
den hose.
3. Pull side “A” of quick connect
fitting toward garden hose and
push onto nipple adapter.
4. Push side “A” of quick connect
fitting towards nipple adapter and
release.
SYSTEM CONNECTION
1. Insert lance into the gun and turn
clockwise to positive stop as shown
in Figure 6.
2. Ensure that the power switch is in
the “OFF” position.
3. Attach the high pressure hose and
gun assembly to the unit.
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the
power cord
into a
grounded
120V outlet
and press
the reset
button as
shown in fig-
ure 7. THIS
MUST BE
DONE EACH TIME THE UNIT IS
PLUGGED INTO AN OUTLET.
"A"
Figure 5 - Garden Hose Connection
Figure 6 - Gun/Lance Connection
Reset
Figure 7 - Grounded
plug/reset button
Quick Connect Fitting
Garden
Hose
Nipple
Adapter
NOTE:REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
For parts, product & service information
visit www.campbellhausfeld.com
1
3
5
4
6
7
2
12
10
11
8

Para ordenar repuestos, sírvase llamar al 1-800-330-0712 (En

los Estados Unidos, o llame a su distribuidor local)

Instrucciones de montaje y lista de piezas PW1876

Notas

UL
Approved
#7P64