Campbell Hausfeld IN729000AV, SB5240, SB524000 manual 2

Operating Instructions

Important Safety Instructions				equipment.. Follow all instructions..		Personal Safety
INSTRUCTIONS PERTAINING TO A				Contact your Campbell Hausfeld		a..	Stay alert. Watch what you are
				representative if you have any
							doing and use common sense
RISK OF FIRE, ELECTRIC SHOCK, OR
				questions..
							when operating the tool. Do not
INJURY TO PERSONS
			c.	Only persons well acquainted with			use the tool while tired or under
		When using tools,
				these rules of safe operation should			the influence of drugs, alcohol,
		basic precautions
				be allowed to use the unit..			or medication. A moment of
should always be followed, including
the following:					Read and		inattention while operating the
California proposition 65					understand tool		tool increases the risk of injury to
			labels and manual. Failure to follow				persons..
		This product or
			warnings, dangers, and cautions could			b..	Dress properly. Do not wear loose
		its power cord may	result in DEATH or SERIOUS INJURY.
							clothing or jewelry. Contain long
contain chemicals known to the State			Work Area
of California to cause cancer and birth							hair. Keep hair, clothing, and
defects or other reproductive harm.			a..	Keep the work area clean and well			gloves away from moving parts.
Wash hands after handling.
				lighted. Cluttered benches and dark			Loose clothes, jewelry, or long
				areas increase the risks of electric			hair increases the risk of injury to
				shock, fire, and injury to persons..			persons as a result of being caught
You can create dust when
			b..	Do not operate the tool			in moving parts..
you cut, sand, drill or grind
				in explosive atmospheres,		c..	Avoid unintentional starting.
materials such as wood,
				such as in the presence of			Be sure the switch is off before
paint, metal, concrete, cement, or other
masonry. This dust often contains				flammable liquids, gases,			connecting to the air supply. Do not
chemicals known to cause cancer, birth				or dust. The tool is able to create			carry the tool with your finger on
defects, or other reproductive harm.				sparks resulting in the ignition of			the switch or connect the tool to th
Wear protective gear.
				the dust or fumes..			air supply with the switch on..
General			c..	Keep bystanders, children, and		d..	Do not overreach. Keep proper
				visitors away while operating the			footing and balance at all times.
a.. To reduce the risks of
	electric shock, fire, and			tool. Distractions are able to result in			Proper footing and balance enables
	injury to persons, read all			the loss of control of the tool..			better control of the tool in
	the instructions before						unexpected situations..
	using the tool.					e..	Use safety equipment. A dust mask,
b. Be thoroughly familiar with the							non-skid safety shoes and a hard
	controls and the proper use of the

Tool Components and Specifications

• Requires: 0..4 SCFM with 10
fasteners per minute @ 90 psi
• Air inlet: 1/4 inch NPT
• MAGAZINE CAPACITY: 100 fasteners per
load, 18 gauge
• BRADS: 3/8 inch to 2 inch
• STAPLES: 1/2 inch to 1-1/2 inch;
1/4 inch crown
• WEIGHT: 3 lbs.., 1 oz..
• LENGTH: 9-3/4 inch
• HEIGHT: 9-1/2 inch	Work
• MAXIMUM PRESSURE: 120 psi
	Contact
• PRESSURE RANGE: 70 psi - 120 psi	Element

Adjustable Direction

Exhaust Deflector

Trigger

Adjustable

Depth Control

Nail Loading Area

Magazine

Nail Discharge Area

www.chpower.com

2