Electrial connection

Power supply voltage and frequency: 230-240V a.c. 50/60 Hz.

Note: the supply cable must be positioned so that it never reaches at any point a temperature 50°C higher than the room temperature.The cable must be routed away from the rear vents. Should you require it, you may use a longer cable, however, you must ensure that the cable supplied with the appliance is replaced by one of the same specifications in accordance with current standards and legislation.

Your appliance is supplied with a 13 amp fused plug that can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING -THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a cable extension or to re-route the mains cable through partitions, units etc., please ensure that either:

•the plug is replaced by a fused 13 amp re-wireable plug bearing the BSI mark of approval.

or:

•the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Please note: for appliances with a rating greater than 13 amp (eg: electric hob, double ovens and freestanding electric cookers etc.) the mains cable must be wired into a cooker output point with a rating of 45 amp. In this case the cable is not supplied.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	- Earth
Blue	- Neutral
Brown	- Live

If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Connect Green & Yellow wire to terminal marked “E” or $or coloured Green or Green &Yellow. Connect Brown wire to terminal marked “L” or coloured Red.

Connect Blue wire to terminal marked “N” or coloured Black.

If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in accordance with the following code:

BLUE	“NEUTRAL”(“N”)
BROWN	“LIVE”(“L”)
GREEN ANDYELLOW	“EARTH” (“E”)

GREEN & YELLOW

BROWN

BLUE

13 amp fuse

CROSS-BAR CORD GRIP

C50GKB, C50GKX, C50GKW, C50GKS specifications

The Cannon C50 series, specifically the C50GKS, C50GKW, C50GKX, and C50GKB models, represents a significant advancement in the realm of modern firearms. Renowned for their reliability, precision, and ergonomic design, these rifles are tailored to meet the needs of both amateur and professional shooters alike.

One of the standout features of these models is their advanced gas-operated reloading system, which ensures swift and seamless operation, allowing for consistent firing even during prolonged use. This gas system not only contributes to the rifles' impressive rate of fire but also minimizes recoil, enhancing the shooter's control and accuracy. Each model in the C50 series is engineered for optimal performance, making them suitable for various shooting applications from competitive sports to tactical scenarios.

In terms of construction, the C50 series incorporates high-quality materials that enhance durability and resistance to wear and tear. The barrels are crafted from premium steel, ensuring longevity while maintaining accuracy. Additionally, these rifles feature a modular design that allows for easy customization. Shooters can modify components such as sights, grips, and stocks according to personal preferences, making each rifle truly unique.

The user-friendly design extends to the controls of the C50 models, which have been thoughtfully placed for ease of access. Shooters will appreciate the ambidextrous safety mechanism and magazine release, allowing for a comfortable experience regardless of their dominant hand. The adjustable stock included in these models caters to different shooter heights and preferences, ensuring a perfect fit for maximum comfort.

Technology plays a crucial role in the C50 series, with some models featuring integrated optics ready mounts that facilitate the addition of red dot sights or scopes. This not only enhances targeting accuracy but also allows shooters to quickly acquire targets under a variety of conditions.

In summary, the Cannon C50GKS, C50GKW, C50GKX, and C50GKB rifles are exceptional firearms that combine innovation with practicality. Their advanced technology, robust construction, and customizable options make them a top choice for those seeking reliability and performance in a firearm. Whether for sport shooting, hunting, or tactical use, these models promise to deliver an unparalleled shooting experience.

Cannon C50GKW, C50GKX, C50GKB, C50GKS manual Electrial connection

Models: C50GKB C50GKX C50GKW C50GKS