Easy Start Guide

Thank you for purchasing the Canon imageFORMULA DR-2580C.

This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the procedures outlined in this Easy Start Guide to set up the scanner. Details on using the scanner are described in the User’s Guide packaged with the scanner. Before you start using the scanner, make sure to thoroughly read the User’s Guide.

Checking the Packing List

When you unpack your scanner, make sure that it contains all of the following accessories.

If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative.

DR-2580C Scanner

AC Adapter/Power Cord

USB Cable

Document Guide

 

 

 

 

 

 

 

 

 

Adapters

 

Docum

 

Sca

 

 

 

 

 

 

Easy

ent

 

 

 

 

 

 

 

 

St nner

DR-25

 

 

 

 

 

Chec

 

 

art

 

 

 

 

 

 

 

Guide

 

 

 

 

 

 

 

 

 

80C

 

 

 

 

 

king

the

 

 

 

 

 

 

 

 

 

Pac

 

 

 

ís

 

 

 

 

 

king

List

 

Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DR-2580C

Application

Easy Start Guide

User’s Guide

Setup Disc

Software Disc

(This Manual)

 

 

 

 

 

Retard Roller

Roller Unit

Job Labels

Adobe Acrobat

 

 

 

 

 

 

 

 

 

 

 

 

 

Setup Disc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quick Reference

Warranty Card

Registration Card

Guide

(U.S.A and Canada only)

(U.S.A and Canada only)

Note

To use the roller unit and retard roller, you need to install them in the scanner. “Installing the Rollers”

The DR-2580C Setup Disc contains the “DR-2580C Scanner Driver” and “CapturePerfect 3.0”. For details, refer to "About the Setup Disc" on page 16 of the Users Guide.

The following application software is included on the application software disk that comes with this product.

[Presto! BizCard Reader SE] Name card management software provided with the multi-language OCR made by NewSoft Technology Corp.

[OmniPage SE]* Optical character recognition (OCR) software with multiple language support, made by Nuance Communications Inc.

[PaperPort® 11]* File management application that makes it easy to store, orga- nize, and retrieve digital documents, made by Nuance Communications Inc.

*In order to receive support of OmniPage SE and PaperPort® 11, you need to upgrade to a Professional version.

Please see following URL for upgrade. http://www.nuance.com/partneroffer/canon

Items included in this package are subject to change without notice.

Keep the package and packing materials for storing or transporting the scanner.

After checking the package contents, you need to prepare the scanner for use. (STEP2)

Removing the Packing Materials and

Installing the Rollers

Perform the following steps to remove the scanner from the box, remove the orange tape and protective sheets from the scanner, and install the roller unit and retard roller in the scanner.

1. Peel off all the orange tape from the outer casing.

When peeling off the protective tape fastening the document eject tray extension, hold the document eject tray extension firmly in place with your hand.

Document Eject Tray Extension

2. Open the rear cover and remove the protective sheet.

Rear Cover

3. After pushing both sides of the rear cover closed, open the document feed tray.

Document Feed Tray

4. While squeezing the OPEN knob from both sides, open the upper unit.

Upper Unit

OPEN Knob

5. Remove the orange protective tape together with the protective sheet.

6. Check that all the protective tape and protective sheets have been removed, and then install the roller unit and the retard roller in their designated locations.

Lock Lever

Roller Unit

Retard Roller

6-1 Follow the steps below to install the roller unit in the upper unit. 1. Flip up the lock lever (1), and slide it to the right (2).

2. Load the roller unit onto the scanner’s shaft.

3.Slide the protrusion on the roller unit into the groove on the scanner, and then lift the roller unit into place.

4. Slide (1) and close (2) the lock lever to lock the roller unit.

6-2 Follow the steps below to install the retard roller on the inside of the roller cover. 1. Remove the roller cover.

2.Flip up the retard roller lock lever (1), and slide it to the right (2)

3. Load the retard roller so that the notch in the roller is aligned with the scanner’s shaft.

4.Slide the lock lever to the left so that it fits into the retard roller hole (1), and then press the lock lever completely down to lock the retard roller (2).

5. Attach the roller cover.

7. Gently close the upper unit.

Make sure it is closed securely by pushing on both edges until you hear a click.

The scanner is now ready for use.Next, you need to install the scanner software. (STEP3)

Installing the Software

Install the software before connecting the scanner to the computer.

Warning

Do not connect the scanner to the computer before installing the software. If you connect the scanner and turn it ON before you install the software, the wizard screen on the right will appear. If this wizard is displayed, click the [Cancel] button to exit the wizard, and turn the scanner OFF.

Wizard Screen (Windows XP)

Be sure to log on with administrator privileges when logging on to Windows.

Close all other applications before installing the software.

1.Turn ON your computer.

2.Insert the DR-2580C Setup Disc into the

computer’s CD-ROM drive.

The setup wizard automatically starts up when you insert the CD-ROM into the CD-ROM drive. If the setup wizard does not start up, run the setup.exe application on the CD-ROM.

PUB. CE-IE-637

©CANON ELECTRONICS INC. 2008

Trademarks

• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries.

Continued on back side

• Microsoft Windows® is a registered trademark of Microsoft USA in the United States and other countries.

• Other brands and product names used in this manual may be trademarks or registered trademarks of their respective companies.