GB

The machine wont spin properly.

The machine leaks from the dispenser.

The machine leaks (other than dispenser).

The indicator lights on the console are flashing rapidly.

The machine smells.

The machine door cannot be opened.

Door Seal damaged at the bottom.

The water level is too low when the machine is washing.

There is too much foam.

•Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy item (eg duvet, quilt, etc). - Try the programme again using a different load.

•The dispenser drawer is blocked with detergent and requires cleaning.

•The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again.

•The machine is tilting forwards - It must be level when in its final position.

•The fill hose is loose, check both the cabinet and tap ends.

•The fill hose is tight but still leaks, if so replace the rubber washers, or the fill hose is missing the rubber washer.

•The drain hose is not fixed in properly.

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again If the problem persists contact the Technical Assistance Service.

•The machine requires a service wash. Run a 90 degree wash cycle with deter- gent and no laundry.

•The door will not open until the door lock indicator light goes out shortly after the program has finished.

•The door seal has drainage holes at the bottom - This is normal.

•The water level is correct if it can be seen at the bottom of the door.

•The detergent is not suitable for machine washing (it should display the text

‘for washing machines’ or ‘hand and machine wash’ or the like).

•Too much detergent was used - less detergent is required in soft water.

After completing the programme, or before starting a programme, the machine has turned itself off (no lights).

General.

•To comply with new energy saving regulations the machine is fitted with an automatic standby system. Press ‘ON/OFF’ button for 3 seconds to activate the machine, it can then either be switched off or a new programme selected.

•Your washing machine contains sensors that monitor progress during the wash cycle (eg: Water Levels, Temperatures, Out of Balance loads, Wash time/progress). Normally, if your machine successfully completes the cycle, there is unlikely to be anything wrong!

Remember, you will be charged for a service call for problems caused by incorrect installation, as listed above. Not emptying contents from pockets may cause pump or drain blockages, or may damage the machine.

Do not wash items which do not have a wash label, or wash items that are not intended as machine washable.

14

Page 13 Page 15
Page 14
Image 14
Cannon IWE manual
Page 13 Page 15

IWE specifications

Cannon IWE, a leading player in the field of industrial weighing solutions, is renowned for its innovative approach to load measurement technology. Offering a range of products designed to meet the diverse needs of industries, the Cannon IWE brand stands out for its commitment to precision, durability, and user-friendly functionality.

One of the standout features of Cannon IWE products is their advanced load cell technology. This technology ensures accurate measurement by converting a load or force into an electrical signal. The load cells are engineered to maintain high precision even under challenging conditions, making them ideal for various applications, including manufacturing, logistics, and construction.

Cannon IWE also incorporates robust materials in its design, ensuring that their weighing instruments can withstand harsh environments. Many of their products are built with stainless steel housings, which provide excellent corrosion resistance and protect against the impact of dust and water. This durability makes them suitable for both indoor and outdoor use, as they can function efficiently in diverse environmental conditions.

In terms of connectivity, Cannon IWE products are equipped with the latest wireless technologies. This allows users to monitor and control weights remotely, facilitating improved data collection and analysis. Users can easily integrate these systems into existing workflows, enhancing efficiency and operational effectiveness.

The user interface of Cannon IWE systems is designed with the end-user in mind. The intuitive displays and controls ensure that operators can easily navigate through settings and monitor measurements without extensive training. This usability is a critical factor for industries where time efficiency is crucial.

Moreover, Cannon IWE emphasizes the importance of compliance with international standards. Their weighing systems are often certified to ISO and OIML standards, which not only guarantees precision but also ensures that users meet legal requirements in their respective industries.

Another notable characteristic of Cannon IWE is their commitment to sustainability. The company is continuously exploring ways to reduce their environmental footprint through energy-efficient practices in manufacturing and materials usage.

In conclusion, Cannon IWE stands as a pioneering brand in industrial weighing solutions, characterized by cutting-edge load cell technology, durability, advanced connectivity, user-friendly design, compliance with standards, and a commitment to sustainability. Their comprehensive range of products effectively addresses the demands of modern industries, positioning them as a reliable partner in achieving precision and efficiency in load measurements.
Top Page Image Contents