Preparing to Print
3Connect the camera to the printer.
• Connect the camera to the printer with
the USB cable that came with the
camera to. Refer to the printer’s instruction manual to find out which
port to connect the USB cable to.
•When connecting the cable plug to the
camera’s <
> terminal, the cable plug’s <
> icon must face the front side of the camera.
4Turn on the printer.
5Turn the camera’s <
> switch to < >.
s When the printer connection is confirmed, the beeper will sound briefly.
6Press the <
> button.
sThe image will be displayed, and the <w> icon will appear on the upper left.
In step 5, if you hear long beeps, it means something is wrong with the printer. To find out what’s wrong, do the following:
Press the <
> button to playback an image. Then do step 2 (Press
<
>) and step 4 (Print the image) on the next page. An error message will then appear on the LCD monitor. To fix the problem, see “Error Messages” on page 11.
If the camera is connected to the printer and you do not operate it for approx. 6 minutes, the camera power will turn off automatically. However, if the auto power off time is longer than 8 minutes, then that setting will take effect instead.
3