Canon 2044B002 Image Stabilizer

	5	Image Stabilizer
You can use the image stabilizer in AF or MF
					¡The Image Stabilizer cannot compensate for a
mode.
					blurred shot caused by a subject that moved.
This function provides optimal image stabilization
					¡The Image Stabilizer may not be fully effective if you shoot
depending on shooting conditions (such as
					from a violently shaking vehicle or other transportation.
shooting still subjects and following shots).					¡The Image Stabilizer consumes more power
					than normal shooting, so fewer shots can be
					taken if you use the function.
					¡When shooting a still subject, it compensates for
					camera shake in all directions.
					¡It compensates for vertical camera shake during
					following shots in a horizontal direction, and
					compensates for horizontal camera shake
					during following shots in a vertical direction.
	1 Set the STABILIZER switch to
			.		¡When you use a tripod, the Image Stabilizer
					should be turned off to save battery power.
	¡If you are not going to use the image				¡Even with a monopod, the Image Stabilizer will be
		stabilizer function, set the switch to		.
					as effective as during hand-held shooting.
	When you press the shutter button				However, depending on the shooting environment,
	2halfway, the Image Stabilizer will				the Image Stabilizer effect may be less effective.
					¡The image stabilizer function also operates when the
	start operating.
					lens is used with an Extension Tube EF12 ll or EF25 ll.
	¡Make sure the image in the viewfinder is				¡If you set the camera’s Custom Function to
		stable, then press the shutter button the			change the assigned button to operate the AF,
		rest of the way down to take the picture.			the Image Stabilizer will operate when you press
					the newly assigned AF button.

ENG-6