Canon 2232B002AA, 3983B001, IXUS 200 IS, SD980 IS Checking the Focus, Switch frames, Change the magnification level or location, Press the pbutton, and switch to the focus check display (p. 45)

Checking the Focus

You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.

Press the pbutton, and switch to the focus check display (p. 45).

XA white frame will appear where the AF frame or face was when the focus was set.

XA gray frame will appear on a face detected during playback.

XThe area within the orange frame appears magnified.

Switch frames.

●Move the zoom lever toward kto change the display.

XThe screen shown to the left will appear.

●ress m to move to a different frame when multiple frames appear.

Change the magnification level or location.

●Use the zoom lever to change the display size, and the opqrbuttons to change the display position while checking the focus.

●Pressing the n button resets the display to Step 1.

Quickly checking the focus (Active Display)

If you shake the camera gently as shown in the illustration, you can quickly switch to the focus check display. If you gently shake the camera again when multiple frames are displayed, you can switch to another frame. If you shake the camera again after you reach the last frame, you will cycle back to the first frame.

111