5. Hood

The ET-87 hood can keep unwanted light out of the lens, and also protects the front of the lens from rain, snow, and dust.

Button

Attaching

Removing

To attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood as shown by the arrow until the lens' red dot is aligned with the hood's stop position mark.

To remove the hood, hold down the button on the side and turn the hood in the direction of the arrow until the position mark on the hood aligns with the red dot.

The hood can be reverse-mounted on the lens for storage.

• Part of the picture may be blocked if the hood is not attached properly.

•When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it.

ENG-7