5 Windows Macintosh

If the Found New Hardware or Found New Hardware Wizard dialog box appears:

12

A

B

1 Remove the USB cable connected to your computer.

The dialog box may close. In this case, proceed from .

2 Click Cancel to quit the dialog box.

3 Proceed from .

TURN OFF THE PRINTER (A).

•Make sure that the POWER lamp (B) has stopped flashing and is off.

•It takes about 1 minute until the printer turns off.

Turn on the computer, then insert the Setup CD- ROM into the CD-ROM drive.

The setup program should start automatically.

Windows Vista

 

 

Go to Step .

 

 

Windows XP/2000

 

 

Go to Step .

 

•If the program does not start automatically, double-click the CD-ROM icon on the computer. When the CD-ROM contents appear, double-click MSETUP4.EXE.

12