Install the Print Head
•Handle the Print Head carefully. Do not drop or apply excessive pressure to it.
1 | 2 |
C | B |
C |
|
A | D |
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B) | Make sure that the Print Head Holder |
until it stops. | (D) moves to the installation position. |
Close the Document Cover (C) and lift it with the Scanning Unit (Cover).
•The Print Head Holder makes a noise as it moves. This is normal operation.
•If the Print Head Holder does not move, make sure that the machine is turned on.
Hardware Setup