Canon manual Expansion Boards For Added Functionality, The Canon imageRUNNER 330/400 Series

NetSpot provides end-users	Through the NetSpot Features
and administrators with easy	Tab, users can easily determine
access to device status	which imageRUNNER is configured
information.	to meet the needs of their output.

The Canon imageRUNNER 330/400 Series.

Giving You the Power to Create and Distribute Knowledge and Ideas in New Ways Within Your Workgroup and Beyond.

When fully configured, the imageRUNNER 330/400 Series delivers 5,550 sheets of on-line paper, the highest in its class.

Expansion Boards For Added Functionality*

The following expansion boards give your system the ability to print, fax or scan and interface with other systems in your office network:

1. Network Multi-PDL Printer Board-H1

(Standard on imageRUNNER 330N/400N only) The Network Multi-PDLBoard-H1 provides a direct 10/100 Ethernet connection to your local area network. Operating at 200MHz with a 32MB standard memory and 2.1GB Hard Drive, this high-performance network print connection is equipped for both PCL5e and PostScript 3 printing, and also offers multiple protocol support for many network and computer operating system platforms.

i m a g e R U N N E R 3 3 0 / 4 0 0 S e r i e s C o n n e c t i v i t y

	S u b d i r e c t o r y
S c a n
F a x
P r i n t
C o p y
	S e r v e r	C l i e n t P C
S c a n	C l i e n t P C	C l i e n t P C
W o r k s t a t i o n

*The Expansion Board Base Unit-C1 is required prior to installation of all functional Expansion Boards.

2. Network Printer Board-K1

(Optional for imageRUNNER 330S/400S only) While the Network Printer Board-K1 offers the same performance as the Network Multi-PDL Printer Board-H1, it is specifically designed for PCL printing environments only. This printer board can be configured for the imageRUNNER 330S/400S with the pre-installation of the Expansion Board Base Unit-C1, required for adding extra functionality to these models.

3. Token Ring Interface Kit-TR4

(Optional on all imageRUNNER 330/400 models) Ideally suited for driving full-device performance over Token Ring networks, this optional board can be equipped on either Network Printer Board, and supports environments operating at 4/16 Mbps via RJ-45 and DB-9 connections, with multiple-protocol support and integration within Canon’s NetSpot architecture.

4. Super G3 Fax Board-F1

The Super G3 Fax Board-F1 provides more productivity than stand-alone facsimile machines. With JBIG compression, a 33.6 Kbps transmission speed, and a memory upgradable to 96MB to support up to 1,000 sheets, the Super G3 Fax Board-F1 is a flexible alternative to traditional, “non-networked” fax devices.

5. Super G3 Dual Line Fax Board-A1

Equipped with the same capabilities as the Super G3 Fax Board-F1, the Super G3 Dual Line Fax Board-A1 adds another line for sending and receiving G3 type faxes simultaneously.

6. Scanning Interface Board-D1

(Optional on all imageRUNNER 330/400 devices) The Scanning Interface Board-D1 is designed with a standard 10MB memory to handle scanning needs from low-resolution text to high-grayscale images. Supporting scanning resolutions of 150 dpi to 2400 dpi, this optional board integrates paper and digital workflows with ease.

Giving You the Power to Create and Distribute Knowledge in New Ways, Within Your Workgroup and Beyond. The Canon imageRUNNER 330 and imageRUNNER 400.