Customization
118
4Custom Picture Settings
White Balance
Adjusts the amount of white balance throughout the whole image.
[R Gain]: Adjust the intensity of red tones. This setting can be adjusted
from -50 to 50. (Default: 0)
[G Gain]: Adjust the intensity of green tones. This setting can be adjusted
from -50 to 50. (Default: 0)
[B Gain]: Adjust the intensity of blue tones. This setting can be adjusted
from -50 to 50. (Default: 0)
Color Correction
The camcorder detects the characteristics of a certain color (color phase,
chroma, area and Y level) and corrects them when recording. You can set
the color correction for up to two different areas (A and B).
[Select Area]: Selects the area or areas to correct. Available options are
[AreaA], [Area B] and [Area A&B]. Select [Off] to turn this
setting off. (Default: [Off])
[Area A Setting]: Determines the area in which colors will be corrected.
[Phase]: Adjusts the color phase for area A. This setting can be
adjusted from 0 to 31. (Default: 0)
[Chroma]: Adjusts the color saturation for area A. This setting can be
adjusted from 0 to 31. (Default: 16)
[Area]: Adjusts the color range for area A. This setting can be adjusted
from 0 to 31. (Default: 16)
[Y Level]: Adjusts the brightness for area A. This setting can be
adjusted from 0 to 31. (Default: 16)
[Area A Revision]: Sets the amount of correction for area A.
[Level]: Adjusts the amount of correction to the color saturation. This
setting can be adjusted from -50 to 50. (Default: 0)
[Phase]: Adjusts the amount of correction to the color phase. This
setting can be adjusted from -18 to 18. (Default: 0)
[Area B Setting]: Determines the area in which colors will be corrected.
[Phase]: Adjusts the color phase for area B. This setting can be
adjusted from 0 to 31. (Default: 0)
[Chroma]: Adjusts the color saturation for area B. This setting can be
adjusted from 0 to 31. (Default: 16)
[Area]: Adjusts the color range for area B. This setting can be adjusted
from 0 to 31. (Default: 16)
[Y Level]: Adjusts the brightness for area B. This setting can be
adjusted from 0 to 31. (Default: 16)
[Area B Revision]: Sets the amount of correction for area B.
[Level]: Adjusts the amount of correction to the color saturation. This
setting can be adjusted from -50 to 50. (Default: 0)
[Phase]: Adjusts the amount of correction to the color phase. This
setting can be adjusted from -18 to 18. (Default: 0)