Trimming

You can cut out a portion of a recorded image and save it as a new image file.

 

Choose [Trimming].

 

z Touch ø, then nto choose the

 

1 tab, and touch [Trimming].

 

Choose an image.

 

z Drag across the screen to choose an

Trimming Area

image, then touch [OK].

Trimming Area Display

Recorded pixels after trimming

Adjust the trimming area.

XA frame will appear around the portion of the image to be trimmed.

XThe original image will display in the upper left and the trimmed image will display in

the lower right.

zIf you move the zoom lever, touch or the image on the lower right of the screen, you can change the frame size.

zIf you drag on the image at the upper left or the image on the lower right, you can move the frame.

zIf you touch , you can change the frame orientation.

zIn an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by touching .

zTouch [New File].

XThe [Save new image?] screen will appear.

Save as a new image and display.

zFollow Steps 4 and 5 on p. 145.

146