Canon manual 112

Changing the Image Quality

You can choose among 4 different image quality settings.

Choose the image quality setting.

zAfter pressing the m button, press the

opbuttons to choose , then press the m button again.

Choose an option.

zPress the op buttons to choose an option, then press the m button.

XThe option you set will appear on the screen.

Image Quality and Shooting Time per Memory Card

Image	Recording Pixels,		Content	Memory Card Capacity
Quality	Frame Rate			4 GB	16 GB
	1920 x 1080 pixels,	For shooting full		Approx.	Approx.
	24 frames/sec.	high-definition movies.		14 min. 34 sec.	59 min. 40 sec.
	1280 x 720 pixels,	For shooting		Approx.	Approx.
					1 hr. 24 min.
	30 frames/sec.	high-definition movies.		20 min. 43 sec.
					54 sec.
		The image quality will be			Approx.
	640 x 480 pixels,	higher when compared		Approx.
					2 hr. 59 min.
	30 frames/sec.	with	, but the recording	43 min. 43 sec.
		time will be shorter.			3 sec.
		Since the file size is small,		Approx.	Approx.
	320 x 240 pixels,	shooting time will
				1 hr. 58 min.	8 hr. 4 min.
	30 frames/sec.	increase, but the image
				19 sec.	30 sec.
		quality will decrease.

•Based on Canon’s testing standards.

•Recording will automatically stop when the clip file size reaches 4 GB, or when the

recording time reaches approximately 10 minutes when shooting in			or	, and
approximately 1 hour when shooting in	or	.

•Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 6 or higher memory cards are recommended.

Black bars will appear on the top and bottom of the screen in or . These areas will not be recorded when shooting.

112