Recharging the Battery
1 Remove the protective cover. When you remove the battery from the camera, be sure to reattach the cover to protect it against short circuiting.
Battery pack slot index
2 Attach the battery.
Align the battery’s front edge with the battery charger’s index line. While pressing down the battery, slide it in the direction of the arrow.
To detach the battery, follow the above procedure in reverse.
3Recharge the battery. For
As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Recharge Level | Charge Lamp | |
0 - 50% | Blinks once per second | |
|
| |
50 - 75% | Blinks twice per second | |
75 - 90% | Blinks three times | |
per second | ||
| ||
90% or higher | Lights on |
*The numbers and markings on the battery charger correspond to the table above.
For
Connect the power cord to the charger and insert the plug into the power outlet.
XRecharging starts automatically and the charge lamp starts blinking in red.
It takes about 100 min. to fully recharge a completely exhausted battery.
The time required to recharge the battery depends on the ambient temperature and battery’s charge level.
24