Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode or 16-bit mode.

When using the built-in microphone, do not connect any devices to the MIC

E

 

terminal (OPTURA60: or the advanced accessory shoe). OPTURA60: When

 

 

 

using the DM-50 Directional Stereo Microphone, do not connect any devices to

 

 

the MIC terminal.

 

 

You cannot use the DV terminal for audio dubbing.

If you add sound to a tape not recorded with this camcorder, sound quality may decrease.

Sound quality may decrease when you add sound to the same scene for more than 3 times.

You can check the picture on the LCD screen.

When you connect an audio device, check the sound via built-in speaker or audio device. You can also connect a TV via S-video terminal.

When you use a microphone, you can check the picture on a TV connected via the AV terminal and the sound via headphones connected to the TV. When you connect a TV via S-video terminal, you can check the picture on the TV screen and the sound with headphones connected to the camcorder.

Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.

Editing

115