Special Modes for Other Purposes
95
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
Choose .
zFollow steps 1 – 2 on p.80 a nd choose ,
and then press the p button.
zPress the qr buttons to choose , and
then press the m button.
Compose the shot and press the
shutter button halfway.
zMake sure a green frame is displayed around
the face of the person who will wink.
Press the shutter button all the way
down.
XThe camera now enters shooting standby
mode, and [Wink to take picture] is displayed.
XThe lamp blinks and the self-timer sound is
played.
Face the camera and wink.
XThe camera will shoot about two seconds
after detecting a wink by the person whose
face is inside the frame.
zTo cancel shooting after you have triggered
the self-timer, press the n button.
Using the Wink Self-Timer
Still Images
•If the wink is not detected, wink again slowly and deliberately.
•Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•Closing and opening both eyes at once will also be detected as a wink.
•If winking is not detected, the camera will shoot about 15 seconds later.
•To change the number of shots, press the op buttons after choosing in
step 1. [Blink Detection] (p.76) is only available for the final shot.
•If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
COPY