1 Set the camera to <R> (Remote control shooting).
For the setting method, see the explanations about the drive mode or remote control shooting in the camera’s instruction manual.
Shade the eyepiece of the camera viewfinder so that light does not enter.
2 Take the picture.
Check that the <Q> lamp is lit, point the remote control transmitter toward the camera, and press the remote release button.
BThe picture is taken after two seconds.
When wireless flash shooting is enabled and the power switch on the 270EX II is set to <SLAVE>, the 270EX II fires.
Be careful not to cover the remote control transmitter or the wireless sensor of the 270EX II with your hand.
The remote control function has an operation range of about 5 m / 16.4 ft. from the front of the camera.
Check the shooting results while performing remote control shooting.
20