11
Remove the packing material.
Remove the packing material.
Lift the tab.
Place the toner cartridge on a flat surface,
and then lift the tab.
Shake five to six times.
Pull the sealing tape completely out.
The full length of the sealing tape is
approximately 19 3/4” (50 cm).
Insert the toner cartridge.
Fit the protrusions on each side of the toner cartridge into the guides
located on each side of the machine, and then slide the toner cartridge
into the machine.
Did you remove all the packing materials?
Check!
Packing materials x2
Packing material with a sheet x1
Sealing tape x1
Protrusion
Protrusion
Preface
1
Installing the Machine
2
Connecting to a Computer and
Installing the Drivers
3
Appendix
Before Using the Machine