8
Gently shake the toner cartridge from side-to-
side five to six times.
Thispart (a plastic part
attachedto the end of
paper)is also a packing
material.Be sure to
removeit.
Remove the packing material.
Lift the tab.
Place the toner cartridge on a flat surface,
and then lift the tab.
Pull the sealing tape completely out.
The full length of the sealing tape is
approximately 20” (50 cm).
Protrusion
Protrusion
Insert the toner cartridge.
Fit the protrusions on each side of the toner cartridge into
the guides located on each side of the machine. Slide the
toner cartridge into the machine.
Did you remove all the packing materials?
Check!
Packing materials x2
Packing material with a sheet x1
Sealing tape x1
Remove the packing material.