Canon 6228B002 Wired Connection, bCable Connection, Before Starting Wired Connection Setup, Notes on Wired Connection, Preparation for Connection, aPreparation for Connection

Wired Connection

aPreparation for Connection

Before Starting Wired Connection Setup

1.Make sure that the printer is turned on.

If the power is on, the POWER lamp (A) will be lit.

Notes on Wired Connection

•Make sure that the computer and router (A) (or access point) are connected.

•The confi guration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to the manual of your network device or contact its manufacturer.

•For offi ce use, consult your network administrator.

•Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing data such as your personal information to a third party.

•This printer cannot be used over wireless and wired connections at the same time.

•When using a router, connect the printer and computer to the LAN side (same network segment).

bCable Connection

You will need an Ethernet cable (sold separately).

1. Remove the Cap (A) from the upper port located on the right side at the back of the printer.