Canon 800IS, SD700 IS Viewing Images on a TV set, the TV, 5Turn on the camera, and AUDIO IN jacks on, AV cable to the VIDEO IN, 3 Plug the other ends of the

Viewing Images on a TV set

You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable.

1Turn off the Camera and the TV.2Connect the AV cable to the camera’s A/V OUT terminal.

zOpen the DIGITAL terminal cover with a fingernail from the left side and plug the AV cable in all the way.

3 Plug the other ends of the

VIDEO

AV cable to the VIDEO IN

and AUDIO IN jacks on

the TV.

Yellow IN

Black

AUDIO

4Turn on the TV and switch it to video mode.5Turn on the camera.

The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 30). The default setting varies between regions.

-NTSC: Japan, U.S.A., Canada, Taiwan and others

-PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly.

94