Still Images

Adding a Date Stamp

The camera can add the shooting date to images, in the lower-right corner. However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct (=12).

1 Configure the setting.

zzPress the <n> button, choose [Date Stamp ] on the [4] tab, and then choose the desired option (=26).

XXOnce the setting is complete, [ ] is displayed.

2Shoot.

XXAs you take shots, the camera adds the shooting date or time to the lower-right corner of images.

zzTo restore the original setting, choose [Off] in step 1.

Date stamps cannot be edited or removed.

Shots taken without adding a date stamp can be printed with one as follows. However, adding a date stamp this way to images that already have one may cause it to be printed twice.

-Print using printer functions (=83)

-Use camera DPOF print settings (=86) to print

-Use the software downloaded from the Canon website to print

For details, refer to the Software Guide (=17).

Still Images

Movies

Using Eco Mode

This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption.

1Configure the setting.

zzPress the <q> button several times until [] is displayed.

XXThe screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity.

zzBy pressing the <q> button again, [] is displayed, and Eco Mode is

deactivated.

2Shoot.

zzTo activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.

Cover

Preliminary Notes and

Legal Information

Contents:

Basic Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

ModeSmart Auto

3

Other Shooting

Modes

4

P Mode

5 Playback Mode

6

Setting Menu

7

Accessories

8

Appendix

Index

35