Do not touch the scanner while it is
operating.
8 When prompted to close ScanGear, click [OK].
9 Save the scanned image in ArcSoft PhotoStudio and close the window.
• Do not leave the film strip in the film guide for an extended period of time as heat from the unit
may damage the film.
• For more information on scanning film, see “Scanning Film” in the Scanning Guide.
10
Click [Scan] to start scanning.
7
Follow the steps 2 to 4 in "Try Scanning" on page 5.
5 Select [Negative Film (Color)] or [Positive Film (Color)] in [Select Source] to match the type of film you are scanning, then click [Preview].
6 Place a check mark beside the number(s) of the frame(s) you want to scan. Perform image corrections as needed.
Start ArcSoft PhotoStudio, then start ScanGear.
4
Scanning Film