Using the Self-Timer

1. Press the button to cycle through self-timer settings.

Each time you press the button, the self-timer settings will change.

*

* Depending on the shooting mode, may also appear. For details on how to use , refer to p. 32

of the Advanced Guide.

•When the shutter button is pressed fully, the self-timer lamp will blink. When setting the red-eye reduction function, the self-timer lamp will blink and then stay lit for the last 2.

To cancel the self-timer, press button to select .

„Changing the Delay Time

1. (Rec.) Menu [Self-timer] */ /

.

See Menus and Settings (p. 20).

* Default setting.

10 sec. delay: The shutter releases 10 sec. after the shutter button is pressed.

•2 sec. before the shutter releases, the self-timer sound beeps quickly and the lamp will speed up.

2 sec. delay: The shutter releases 2 sec. after the shutter button is pressed.

•The self-timer sound beeps quickly when the shutter button is pressed and the shutter will release 2 sec. later.

Custom Timer: You can change the delay time (0–10*1, 15, 20, 30 sec.) and number of shots (1–10*2) (p. 17).

• When a delay time of over 2 seconds is set for the [Delay] option, the self-timer sound beeps quickly 2 seconds before the shutter releases. If multiple shots have been specified for the [Shots] option, the sound will play for the first shot only.

*1 Default setting.

*2 Default setting is 3 shots.

16