155

Subject in recorded image is too bright, or image flashes white.

Subject is too close,

zShoot within correct flash range of the

making the flash too

subject when using the built-in flash

strong.

(p. 188).

 

zAdjust the flash output with the flash

 

exposure compensation function

 

(p. 86).

 

zSet the safety FE to [On] (p. 86).

The subject is

zSet the exposure compensation to a

overexposed because the

negative (–) setting (p. 99).

surroundings are too dark. zUse the spot metering function

 

(p. 100).

Too much light is shining zChange the shooting angle.

directly into the camera, or

 

is being reflected off the

 

subject.

 

Flash is set to (Flash zSet the flash to (Flash off) (p. 60). on).

Image contains noise.

ISO speed is too high. zHigher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 68).

zIn , , and mode in the

mode, the ISO speed increases and noise can appear.

Troubleshooting