Using the Self-Timer

1.FUNC. Menu * (Drive Mode) / / .

ÎSee Menus and Settings (p. 20).

* Default setting.

• When the shutter button is pressed fully, the self-timer lamp will blink. When using red-eye reduction, the self-timer lamp

will blink and then stay lit for the last 2 seconds.

To cancel the self-timer, follow step 1 and select .

10 sec. Self-Timer:Shoots 10 sec. after you press the shutter button.

• 2 sec. before the shutter releases, the self-timer sound and lamp will speed up*1.

2 sec. Self-Timer:Shoots 2 sec. after you press the shutter button.

• The self-timer sound beeps quickly*1 when you press the shutter button and the shutter releases 2 sec. later.

Custom Timer: You can change the delay time (0–10*2, 15, 20, 30 sec.) and number of shots (1–10*3).

• When [Delay] is set to 2 or more sec., the self-timer sound begins to beep 2 sec. before the shutter releases. When [Shots] is set higher than 1, the self-timer sound only beeps before the first shot.

*1 May differ depending on My Camera settings.

*2 Default setting.

*3 Default setting is 3 shots.

This setting cannot be set in some shooting modes.

See the Advanced Guide: Functions Available in Each Shooting Mode (p. 136).

ÎSee Selecting a Shooting Mode (p. 9).

16