Scanning with AXIS 1650
56 AXIS 1650 User’s Manual
Using AXIS ScanClient
Connect to the
Scanner 1. Start AXIS ScanClient (Start | AXIS ScanClient). The client will search the
network for scanning devices. Mark the one you would like to use by
clicking on it in the list (you can also select a scanner by entering its IP
address). Click [Connect].
2. If the scanner is busy AXIS ScanClient will show who is using it, otherwise
you will be connected, as indicated on the message line.
Click [Help] to get information on how to connect and disconnect.
Disconnect from the
Scanner You end a scanning session by clicking [Disconnect] on the AXIS
ScanClient.
The message line will change to Disconnected.
Note: The scanning session will automatically end and the channel will be
disconnected after 5 minutes of inactivity.
Invoking a Scan from your Computer
Start a Scan from
your Computer Connect to the scanner with AXIS ScanClient - see page 56 - and place
the object to be scanned on the scanner flatbed.