Canon C4080I, C4580, C4580I, C5185I Printer Connection Method (LPD/Raw)

Setting Up a Computer for Printing/Sending a Fax
3-46
3
Using a TCP/IP Network
Printer Connection Method (LPD/Raw)
Windows 98/Me
■Installing a New Driver
1 Install the driver.
Install the driver according to the following procedures indicated in the manual
for each driver:
•If you want to use the PCL printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the
PCL Driver Guide .
•If you want to use the PS printer driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the
PS Driver Guide .
•If you want to use the fax driver
See the procedure for dynamic installation in Chapter 2, "Getting Started," in the
Fax Driver Guide .
IMPORTANT
If your computer fails to transmit data to the printer during the driver installation,
when the error message appears, click [No] ➞ set the byte count mode to off.
NOTE
• The print application will be LPD and the print queue will be set to <LP> if the driver
has been installed according to the above procedures.
• This machine enables you to specify print queues other than <LP>. For details on
print queues and instructions on how to change the settings, see "Changing the
Port after Installing the Driver," on p. 3-46.
■Changing the Port after Installing the Driver
1 Install Canon LPR2, and change the port settings.
For instructions on how to install Canon LPR2 and set ports, see the Canon LPR2
User's Guide (PDF manual). For instructions on how to display the Canon LPR2
User's Guide , see the Network Quick Start Guide .