Additional Information

Cannot edit Check the memory card

-The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 33).

Cannot enter standby mode now

- The camcorder cannot enter standby mode if the remaining battery charge is too low.

Cannot play back

- There is a problem with the hard disk/memory card.

Cannot play back due to high temperature

-The camcorder has exceeded its operational temperature ( appears). Turn off the camcorder and let it cool down before resuming use.

Cannot play back

Cannot access the HDD

-

There is a problem with the hard disk.

Cannot play back

Check the memory card

-

There is a problem with the memory card.

Cannot play the movies on the HDD Initialize only using the camcorder

-The camcorder's hard disk was initialized using a computer. Initialize the hard disk with this camcorder ( 33).

Cannot play the movies on this memory card

- Movies cannot be played back from a 64 MB or smaller memory card.

Cannot play the movies on this memory card Initialize only using the camcorder

-The memory card in the camcorder was initialized using a computer. Initialize the memory card with this camcorder ( 33).

annot read the HDD

-The hard disk could not be read.

-This message can also appear if condensation has formed ( 121). Wait until the camcorder dries completely before resuming use.

-This message can also appear if the camcorder has exceeded its operational temperature ( appears). Turn off the camcorder and let it cool down before resuming use.

Cannot record

-There is a problem with the recording media.

-This message can also appear if condensation has formed ( 121). Wait until the camcorder dries completely before resuming use.

Cannot record due to high temperature

-The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery pack. Let the camcorder cool down before resuming use.

Cannot record movies in MXP/FXP mode on this memory card

-Movies cannot be recorded in MXP or FXP mode on a memory card if it is rated Speed Class 2. Select a different recording mode ( 35) or replace the memory card with one rated Speed Class 4 or higher.

Cannot record movies on the HDD (Initialize only using the camcorder)

-The camcorder's hard disk was initialized using a computer. Initialize the hard disk with this camcorder ( 33).

108