Changing Shooting Functions

Changing the IS-Mode Settings

●Choose [IS Mode], then press the qr buttons to choose an option.

 

Image stabilization is always on. You

Continuous

can confirm the result directly on the

display, which makes it easier to check

 

the composition or focus.

Shoot Only

Image stabilization is only active at the

moment of shooting.

 

 

Image stabilization only counters up

Panning

and down motion. This option is

recommended for shooting objects

 

 

moving horizontally.

 

 

•If camera shake is too strong, attach the camera to a tripod. It is

recommended to set the IS Mode to [Off] when the camera is attached to a tripod.

•When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically.

Registering Functions to the Button

●Choose [Set Shortcut button], then press the m button.

●Press the opqr buttons or turn the Ê dial

to choose the functions to register, then press the m button.

●Pressing the button will call up the registered function.

• Choose if you want to cancel registration.

• When this symbol is shown on the bottom right of an icon, the function cannot be used in the current Shooting mode or function setting.

•In , each press of the button records white balance data (p. 77), and the white balance settings change to .

•In %, each press of the button will adjust the focus and % will appear on the screen.

•If you press the turn off. Perform

button in , both the LCD monitor displays will one of the following operations to solve the problem.

•Press any button other than the power button

•Change the camera’s vertical or horizontal orientation

153