Canon CR-190I Turning OFF the Power, NOTE, CAUTION, 1 Turn OFF your computer, •Wait at least 10 seconds before turning the scanner back ON

1 19

3 Windows recognizes the CR-190i as new hardware, and installation starts automatically.

(Windows Vista)

NOTE

The CR-190i will be registered as “CANON CR-190i USB” in the Imaging Device directory.

1 Turn OFF your computer.2 To turn OFF the scanner, press the Power Switch to the “ ” position.

CAUTION

•Wait at least 10 seconds before turning the scanner back ON.

•For your safety, disconnect the power plug from the power outlet if you are not using the scanner for a long period of time.

Contents

♦Please read this manual before operating this scanner READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE ■FCC REGULATIONS (For 120V model) ■RADIO INTERFERENCE REGULATIONS (For 120V models) ■RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For 120V models) ■International ENERGY STAR® Office Equipment Program ■European Union (and EEA) only ■Disclaimers INTRODUCTION Manuals for the CR-190i Symbols Used in This Manual Table of Contents INTRODUCTION Important Safety Instructions Packaging: What Is in the Box Preparation Before Use Important Safety Instructions Handling Installation Location Power Supply Moving the Scanner Packaging: What Is in the Box Preparation Before Use Setting Up the Scanner Checking Your Operating Environment Operating Systems: Specifications: Interface Cable Installing the Scanning Utility Connecting the Scanner to a Computer USB Connections Connecting the Power Cord Turning ON and OFF the Power Turning ON the Power Turning OFF the Power Preparing the Ink Cartridge About the Ink Cartridge Setting the Ink Cartridge and Adjusting the Print Position 4 Push down the ink cartridge until it clicks into place 6 Carefully replace the Top Cover Document Feeding and Scanning Index