Canon DCD CAMCORDER manual 69

Message		Explanation
CANNOT DIVIDE THE	Photomovie scenes cannot be divided.		58
SCENE	You may not be able to divide very short scenes.		–
	Scenes cannot be divided when the disc already contains 999		–
	scenes.
	You may not be able to further divide scenes shorter than 5		–
	seconds that were created by dividing a previous scene.
DISC IS FINALIZED	You cannot record additional scenes on a finalized DVD-R disc.		–
CANNOT RECORD	You cannot record additional scenes or unfinalize a DVD-RW disc		–
	in VIDEO mode that was finalized with another digital device.
UNFINALIZE THE DISC	You cannot record additional scenes or convert still images to a		61
	Photomovie scene on a finalized DVD-RW in VIDEO mode.
	Unfinalize the disc first.
DISC IS PROTECTED	The disc is protected. Replace the disc or remove the disc		55
	protection.
DISC ERROR	Initialize new DVD-RW discs before using them.		55
CANNOT READ THE	Disc could not be read. Try cleaning it or replace the disc.		71
DISC	This message can also appear if the camcorder has exceeded its		–
CHECK THE DISC
	operational temperature. Disconnect the power adapter and
	remove the battery and let the camcorder cool down before
	resuming use.
	This message can also appear if condensation has formed. Wait		72
	until the camcorder dries completely before resuming use.
	The disc may not be loaded correctly. Try removing the disc and		20
	reinserting it.
	The disc is not initialized. Initialize the disc.		55
DISC ACCESS FAILURE	There was an error when reading the disc or attempting to write		71
CHECK THE DISC	onto it. Try cleaning the disc or replace it.
	This message can also appear if condensation has formed. Wait		72
	until the camcorder dries completely before resuming use.
	The disc may not be loaded correctly. Try removing the disc and		20
	reinserting it.
DISC COVER IS OPEN	Verify the disc is correctly inserted and close the disc cover.		20
NO DISC	No disc is loaded. Insert a disc.		20
	You inserted a disc recorded in a different Television System		–
	(NTSC).
	This message can also appear if condensation has formed. Wait		72
	until the camcorder dries completely before resuming use.
LOADING THE DISC	The disc is being read. Wait before you start recording.		–
AVOID MOVING THE	Try not to move the camcorder while the image is being recorded.		–
CAMCORDER
UNABLE TO RECOVER	Could not recover a corrupted file.		–
DATA	This message can also appear if condensation has formed. If you		72
	suspect condensation is the reason, do not initialize the disc and
	wait until the camcorder dries completely before resuming use.
DISC FULL	The disc is full (“	END” flashes on the screen) . Delete some	20
	recordings (DVD-RW in VR mode) to free some space or replace		53
	the disc.

E

Trouble?

69