#9 Finish Hardwired Camera and Testing
Complete wired camera with “three wire” setup, showing servo three wire connector.
To test camera, refresh wire #6 and shutter wire #5 are solder together.
Camera will fire flash when these two wires are touched to common wire #4.
Camera must be on, and back door must be latched.
“Film” winding will be heard after the first test. Subsequent test will not include winding without
film in the camera. A 6 second delay is needed between tests for the flash capacitor to recharge.
Copyright 2003, Hag’s House http://www.hagshouse.com/
All rights reserved.
Credits: Original modifications and knowledge gained from Jesse’s Hunting and Outdoors
c/o: Game Trail Cameras & Video Forum.