List of Messages

The following messages may appear on the camera LCD monitor if an error occurs during a camera and Bubble Jet printer connection. (Depending on the Bubble Jet printer, some messages may not appear.)

zPlease refer to the Bubble Jet printer’s user guide for the appropriate remedies.

: Printing restarts if you select [Continue] and press the SET button. For the remedies to other messages that might appear, refer to your Bubble Jet printer’s user guide.

No Paper

There is no paper in the auto sheet feeder. In the case of a Bubble Jet printer equipped with a photo paper cassette, the cassette may be incorrectly inserted or out of paper.

Paper Jam The paper jammed during printing.

Paper Error The paper is not correctly set in the printer.

No Ink

The ink tank has run out of ink or there is no ink tank in the printer.

The ink tank needs to be replaced soon. Prepare a

Low ink level new ink tank. If you select [Continue] in the error screen, you can restart printing.

You can restart printing by pressing the RESUME/ CANCEL button on Bubble Jet Printer. Please request replacement of the waste tank (waste ink

Waste tank full absorber) from the shop where you purchased the printer or your nearest Canon Customer Support center listed in the Contact List provided with the Bubble Jet Printer or in the Bubble Jet user guide.

Ink Error

Check the level of the printer’s ink and the condition of the waste tank (waste ink absorber).

Turn off the printer, then turn it on again. If the error persists, please consult the dealer where you

Printer error purchased your printer or your nearest Canon Customer Support center (listed in the Contact List provided with the Bubble Jet Printer).

Printer in use

The printer is printing the data from the memory card inserted in the computer or printer. The printer automatically starts printing the images from the camera after completing the current printing.

29