SSelecting the AF PointN

Selecting with the Dial

¡ Press the <S> and turn the <6> or <5> dial.

¡ When you turn the dial, the selection will go in the looping sequence shown on the left.

¡ When looking at the LCD panel to select the AF point, note the following:

Automatic selection

, center

, right

,

top

 

 

 

¡If focus cannot be achieved with an EOS-dedicated, external Speedlite’s AF-assist beam, select the center AF point.

AF-Assist beam with the Built-in Flash

Under low-light conditions, the built-in flash fires a brief burst of flashes when you press the shutter button halfway. This is to illuminate the subject to enable easier autofocusing.

¡ In the <3> <5> <7> modes, the AF-assist beam does not light.

¡The built-in flash’s AF-assist beam is effective up to about 4 meters/13.2 feet.

¡In the Creative Zone modes when the built-in flash is popped up with the <I> button, the AF-assist beam will be emitted if necessary.

Lens’ Maximum Aperture and AF Sensitivity

The EOS 20D will execute high-precision AF with lenses whose maximum aperture is f/2.8 or larger.

With lenses whose maximum aperture is f/2.8 or larger

With the center AF point, high-precision, cross-type AF sensitive to both vertical and horizontal lines is possible. With cross-type AF, vertical-line detection is twice as sensitive as horizontal-line detection. The other eight AF points are horizontal-line sensitive or vertical-line sensitive.

With lenses whose maximum aperture is larger than f/5.6

The center AF point is a cross-type AF sensor. The other eight AF points are horizontal-line sensitive or vertical-line sensitive.

68