10. Using the Tripod Mount (Sold separately)

Adjusting the Revolving Mount

This lens can be used with the A II (W) tripod mount ring, sold separately.

You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a particular camera model for switching between vertical and horizontal positions.

Detaching

Use the following procedures to remove and attach the tripod mount.

Turn the locking knob counterclockwise until it becomes loose (about 3 turns), and pull the knob in the direction of the arrow to release the collar.

With the collar open,
To install, while pulling the
remove the tripod mount.
locking knob, bring the collar

 

to the original position, and

 

tighten the locking knob

 

securely.

The tripod collar can be attached to or detached from the lens while the lens is attached to the camera.

ENG-11